IEC Plug Specification

Type A (NEMA 1-15)

Ungrounded 2-prong plug with two flat parallel blades. Commonly used in North and Central America and Japan.

Direct Specification Summary
Type A is an unearthed (ungrounded) electrical plug standard rated for 15A maximum amperage and typical voltages of 100–127V. Sockets are engineered with Two flat parallel blades, 1.5 mm thick, 6.3 mm wide, 15.9–18.3 mm long.
Standard Property Technical Specification
Standard Designation Type A (NEMA 1-15)
Grounding / Earthing No (Unearthed / Double-insulated only)
Pin Count & Geometry 2 Pins — Two flat parallel blades, 1.5 mm thick, 6.3 mm wide, 15.9–18.3 mm long
Maximum Current Rating 15A
Nominal Voltage Range 100–127V
Grounding Status
Ungrounded
2 Pins • 15A Maximum
Typical Voltage Range
100–127V
Physical: Two flat parallel blades, 1.5 mm thick, 6.3 mm wide, 15.9–18.3 mm long

Countries & Territories Using Type A

Type A is officially deployed in the national grid or hotel accommodations of the following countries:

United States (120V) Canada (120V) Japan (100V) Mexico (127V) China (220V) Thailand (220V) Vietnam (220V) Philippines (220V) Colombia (110V) Costa Rica (120V) Taiwan (110V) Peru (220V)

Physical Pin Architecture & Safety Characteristics

The mechanical architecture of Type A is defined by Two flat parallel blades, 1.5 mm thick, 6.3 mm wide, 15.9–18.3 mm long. Sockets engineered for this standard operate at nominal capacities up to 15A.

When traveling with equipment utilizing this plug, verify that the foreign receptacle is compatible with its physical grounding structure. Using 3-to-2 prong grounding cheater adapters can remove protective earth bonding, exposing metallic device housings to live chassis fault risks.

← Back to all plug types